Just want to know how to kill it?
Skip to control methods
Also known as
Tobacco weed, kerosene plant, flannel-leaf, Solanum auriculatum
What does it look like?
A kerosene/capsicum-smelling shrub or small tree, growing up to 10m tall, with whitish, branching soft-woody stems. All parts covered in dense felt-like hairs. The large velvety, oval leaves (10-35 x 3-15 cm), are grey-green on the upper surface, and white to yellowish underneath with prominent ‘ears’ (25mm) at base which clasp the stem. Produces dense clusters of mauve to purple flowers (15-20 mm diameter) with yellow anthers, followed by clusters of round berries (1 cm diameter) that ripen from hard green to soft, dull yellow.
and whitish, branching, soft-woody stems.
Why is it a problem?
Forms dense, often pure stands, crowding out other plants, and inhibiting or preventing the establishment of native plant seedlings (it is allelopathic – meaning they produce toxins that poison the soil).
It grows and matures rapidly, producing many well-dispersed seeds most of year. Berries are toxic and the hairs/dust from the plant irritates skin, eyes, nose, throat. It tolerates wet to dry conditions, salt, all well-drained soils, hot to cool temperatures, semi-shade, damage and grazing.
It will invade heavily disturbed forest and light gaps, shrublands, coastal and estuarine margins, and wetlands.
How much of it do we have?
This weed is spreading fast. Woolly nightshade has been a problem in Waipu for a long time, the weed is now present everywhere and is often seen along road side edges.
How does it spread?
Birds, especially native pigeon, eat the large fruits and spread the seeds. It often grows and spreads along roadsides and disturbed areas.
What can we DO about it?
Lots! Woolly nightshade grows and matures very quickly but it quite easy to kill. By tackling the outlying individuals we can greatly reduce the rate of spread and the amount of seed entering the local environment. Keeping forests healthy and intact also reduces the spread as woolly nightshade invades more open and disturbed habitats. There is also a biocontrol agent in development.
How do I control it?
Additional safety note: Wear a mask and gloves when undertaking woolly nightshade control for a prolonged period as the the leaves shed fine hairs when touched which can irritate skin, eyes, nose and throat. The berries are toxic and handling the plant can casue nausea in some people. Stock may also be at risk.
- Pull up all small plants, dig out large ones ensuring no remaining roots are exposed to light as these will regrow.
- Cut stump application: Cut at ground level & treat stump immediately with (200ml Tordon Brushkiller®/1L water) or (100ml triclopyr/1L water ) or Picloram gel). Undiluted glyphosate can also be used but extra care must be taken when using undiluted herbicide.
- Frill and fill: make deep cuts (2cm deep) into the sapwood at regular intervals around the base of the tree, taking care not to ring-bark the plant. Immediately saturate the cuts with (200ml Tordon Brushkiller®/1L water), or Picloram gel). Wait until the liquid subsides/absorbs and then apply again. Undiluted glyphosate can also be used but extra care must be taken when using undiluted herbicide.
- Drill & fill: Drill (c.12mm drill bit) sloping holes into the sapwood at 20cm intervals around trunk, & immediately fill each hole with (200ml Brushkiller /1L water), or with 10-15mls of undiluted glyphosate (extra care must be taken when using undiluted herbicide.
Spray: (25ml Tordon Brushkiller ®/10L water), or (60ml triclopyr +10ml penetrant/10L water).
Does not tolerate shade well. Maintain shade by planting dense cover, protecting habitat integrity. Kill standing where possible to allow easy access for seedling follow up. Follow up for 3 years. Maintain rolling front of control.
CAUTION: when using any herbicide or pesticide PLEASE READ THE LABEL THOROUGHLY to ensure that all instructions and safety requirements are followed.